The wastewater evaporator is based on the principle of evaporation, concentration and crystallization in view of the characteristics of chemical organic wastewater with high salt content and high concentration. Using multi-effect reduced pressure evaporation, concentration and crystallization, the condensed water after evaporation is generally treated by subsequent biochemical treatment, which can achieve the standard of wastewater discharge. The valve is an industrial device used to transfer media, which can assist the evaporator to transport the raw liquid and the treated water to other processing links.
Below, we will introduce you to the valves that can be used in wastewater evaporators. Hope to help you understand and choose the right valve.
Ball Valve
The ball valve is a quarter-turn valve. It can be used to transmit and truncate media. According to the difference of materials, it can be divided into stainless steel ball valve, carbon steel ball valve, plastic ball valve to meet your pipeline material needs. Then according to the difference of the connection method, it can be divided into threaded ball valve, flanged ball valve, welded ball valve, etc., so that you can connect pipes and valves.
Ball valves can be opened or closed with electric actuators, pneumatic actuators or handles.
Butterfly Valve
Butterfly valve and ball valve belong to the same quarter turn valve. According to the difference of materials, it can be divided into stainless steel butterfly valve, carbon steel butterfly valve, plastic butterfly valve, cast iron butterfly valve, etc. to meet your media needs. According to the connection method, it can be divided into wafer butterfly valve, flange butterfly valve, lug butterfly valve, etc.
Available in electric butterfly valves, pneumatic butterfly valves and manual butterfly valves.
Gate Valve
The gate valve is a linear operated valve. The gate goes up or down in a straight line to open or close the valve. The gate valve can only be fully opened or fully closed. It is an industrial valve used for circulation or cut-off.
Electric actuators, pneumatic actuators or handwheels can be used to drive gate valves.
Globe Valve
The globe valve and the gate valve are both linear operated valves. The globe valve can adjust the opening and closing angle of the valve plate according to the requirements of flow regulation. It is an industrial-grade valve that can be used for circulation, cut-off, and flow regulation.
The globe valve can be driven by electric actuator, pneumatic actuator or handwheel.
Above, is the introduction of valves that can be used in wastewater evaporators. If you have any needs for valves, you are welcome to contact us for the best valve solutions and budget solutions. sales@covnavalve.com
Post time: Jun-16-2022