Successfully added to the request form!
2W-P PVC Solenoid Valve - General Purpose
2W-P General Purpose PVC Solenoid Valve
applied to low pressure system. Available in 12vdc, 24vdc, 110vac and 220ac. Light weight, low cost and durable. Widely used in car wash system, water treatment, and other applications.COVNA provide solenoid valve in stainless steel, pvc and brass material in all pressure and all voltage.
Come and inquiry us to get the best quote!
Model
- Function:Normally Closed
- Pressure:0-1.0 MPa (10 bar)
- Voltage:DC-12V, 24V; AC-24V, 120V, 240V/60Hz; 110V, 220V/50Hz
- Temperature of Media:-5~80℃ (23℉ to 176℉)
- Suitable Media:Water, Air, Oil, Gas, etc
- Material:Plastic
None
None
● Direct lifting diaphragm construction with high frequency.
● Open from 0 bar with large flow rate.
● Applied to low pressure system.
| Port size | 3/8", 1/2", 3/4", 1", 1¼", 1½", 2" | Orifice(mm) | 10, 15, 20, 25, 32, 40, 50 |
| Port Thread | BSPP, BSPT, NPT | Function | Normally Closed |
| Pressure | 0-1.0 MPa (10 bar) | Voltage | DC-12V, 24V; AC-24V, 120V, 240V/60Hz; 110V, 220V/50Hz |
| Temperature of Media | -5~80℃ (23℉ to 176℉) | Suitable Media | Water, Air, Oil, Gas, etc |
| Material | Plastic | Coil |
Y32B,40VA(AC),18W(DC),IP65,100%ED Y42B,50VA(AC),17W(DC),IP65,100%ED |
| Size | Port Size | Orifice | Cv | Min Pressure | Max Pressure | |
| AC(40VA) | DC(18W) | |||||
| 2W-10 | 3/8" | 10 | 4.5 | 0.0 MPa | 0.7 MPa | 0.7 MPa |
| 2W-15 | 1/2" | 15 | 4.5 | 0.0 MPa | 0.7 MPa | 0.7 MPa |
| 2W-20 | 3/4" | 20 | 9.3 | 0.0 MPa | 0.7 MPa | 0.7 MPa |
| 2W-25 | 1" | 25 | 12 | 0.0 MPa | 0.7 MPa | 0.7 MPa |
| AC(50VA) | DC(20W) | |||||
| 2W-32 | 1 1/4" | 32 | 24 | 0.0 MPa | 1.0 MPa | 1.0 MPa |
| 2W-40 | 1 1/2" | 40 | 29 | 0.0 MPa | 1.0 MPa | 1.0 MPa |
| 2W-50 | 2" | 50 | 48 | 0.0 MPa | 1.0 MPa | 1.0 MPa |
