I-COVNA Knife Gate Valve
Iyini i-Knife Gate Valve?
I-valve yesango lommese ivalvu esetshenziselwa ukuphatha izinhlayiya, noma imidiya ebolayo, ebukekayo, ehlinzeka ngezinsizakalo ezivuleke ngokugcwele nezivaliwe ngokugcwele.Kulula ukuyisebenzisa, idizayini elula futhi yonga indawo.
Ivalvu yesango lommese inensimbi engagqwali kanye nommese ongagqwali, ongasetshenziswa ngokuphumelelayo ezimbonini ezinemidiya egqwalayo futhi unganqamula ukungcola futhi akulula ukuwuvimba.Impilo ende.
- Iphepha ne-pulp
- I-power plant
- Amakhemikhali
- Isitshalo sikasimende
- Ukwelashwa kwamanzi angcolile
- nezinye izinhlelo zokusebenza
Ithebula Lempahla Yezingxenye Eziyinhloko Zevaluvu Yesango Lommese:
| 1. Umzimba weValve | 2. Isango |
| 3. Isihlalo seValve | 4. O-ring |
| 5. Isembozo Sesihlalo Se-Valve | 6. Ukupakisha |
| 7. I-Pacing Gland | 8. I-Brackte |
| 9. Isiqu se-Valve | 10. I-Valve Stem Nut |
| 11. Ukuzala | 12. Ukusekela |
Ipharamitha Yezobuchwepheshe Yevalve Yesango Lommese Kagesi:
Umzimba we-valve we-valve yesango lommese kagesi wamukela umklamo obalulekile, onokumelana noketshezi oluphansi nokusebenza okuguquguqukayo nokulula.I-screw drive ye-valve yamukela umklamo ophethe indiza ekabili, okunciphisa kakhulu ukungqubuzana kokudlulisela futhi kusize ukuvulwa nokuvalwa kwe-valve.
| Uhlobo lwe-Actuator | I-Multi-turn Electric Actuator |
| Ukunikezwa kwamandla Okuvamile | Izigaba ezintathu: AC380V |
| Isiginali Yokufaka | 4mA~20mA |
| Ikilasi Lokuvikela | IP65, IP68 |
| Ibanga likasayizi(Intshi) | I-DN50 kuya ku-DN2000 (2" kuya ku-80") |
| Ingcindezi | 10/16 ibha (145 / 232 psi) |
| Izinga lokushisa | -10℃ ukuya ku-400℃ (14°F ukuya ku-752°F) |
| Izinketho Zokuxhuma | I-flanged noma i-Lugged |
| I-Valve Material | I-Cast Iron noma i-Stainless steel 304/316/316L |
| Seal Material | I-PTFE, i-Metal hard seal noma i-alloy eqinile |
| I-Flanged Standard | ANSI B16.5, GB/T9113, JB/T79, HG, SH, JIS, DIN, NF, BS |
Ipharamitha Yezobuchwepheshe Yevaluvu Yesango Lommese Womoya:
I-valve yesango lommese womoya iqukethe i-actuator yomoya kanye ne-valve yesango lommese.I-valve yesango lommese ilula futhi iguquguquka ekusebenzeni, incane ngosayizi, ishelela endleleni, incane ukumelana nokugeleza, ilula ngesisindo, kulula ukuyifaka futhi kulula ukuyihlakaza.
| Uhlobo lwe-Actuator | I-Pneumatic Cylinder (I-Double Acting noma I-Actuator Eyodwa) |
| Ibanga likasayizi(Intshi) | I-DN50 kuya ku-DN2000 (2" kuya ku-80") |
| Ingcindezi | 10/16 ibha (145 / 232 psi) |
| Izinga lokushisa | -10℃ ukuya ku-400℃ (14°F ukuya ku-752°F) |
| Izinketho Zokuxhuma | I-flanged noma i-Lugged |
| I-Valve Material | I-Cast Iron noma i-Stainless steel 304/316/316L |
| Seal Material | I-PTFE, i-Metal hard seal noma i-alloy eqinile |
| I-Flanged Standard | ANSI B16.5, GB/T9113, JB/T79, HG, SH, JIS, DIN, NF, BS |
Ipharamitha Yezobuchwepheshe Yevalve Yesango Lommese:
I-valve yesango lommese we-COVNA enezici zokuklama okugcwele, ukumelana okuphansi nokugcinwa kalula, ukujikeleza kwezindlela ezimbili, ukumelana nokugqokwa okuhle kanye nophawu oluthambile nophawu oluqinile kuyakhethwa.
| Uhlobo Olusebenzayo | Isondo Lesandla |
| Ibanga likasayizi(Intshi) | I-DN50 kuya ku-DN2000 (2" kuya ku-80") |
| Ingcindezi | 10/16 ibha (145 / 232 psi) |
| Izinga lokushisa | -10℃ ukuya ku-400℃ (14°F ukuya ku-752°F) |
| Izinketho Zokuxhuma | I-flanged noma i-Lugged |
| I-Valve Material | I-Cast Iron noma i-Stainless steel 304/316/316L |
| Seal Material | I-PTFE, i-Metal hard seal noma i-alloy eqinile |
| I-Flanged Standard | ANSI B16.5, GB/T9113, JB/T79, HG, SH, JIS, DIN, NF, BS |
Ubukhulu be-Knife Gate Valve:
Ufuna i-valve yesango lommese?Xhumana nathi futhi sizokusiza ukuthi ukhethe okulungile!
