Ivalve yeSolenoidluhlobo lwezixhobo zemizi-mveliso ezilawulwa nguzibuthe we-electromagnetic eziziindawo ezizenzekelayo ezisetyenziswayo ukulawula ulwelo kunye nokulungelelanisa indlela, isantya sokuhamba, isantya kunye nezinye iiparameters eziphakathi kwinkqubo yolawulo lwamashishini.Kukho iintlobo ezininzi zevalve ye-solenoid, edlala indima eyahlukileyo kwiindawo ezahlukeneyo kwinkqubo yokulawula.Eyona isetyenziswa ngokuqhelekileyo iValve yendlela enye, iValve yoKhuseleko, iValve yokuLawula iDirection, ivalve yokulawula isantya, njl. njl. Ivalve yeSolenoid inobungqina bokuvuza okugqwesileyo, ivule kwaye ivale ngokukhawuleza, amandla aphantsi, alungele ukugqwala, ubuthi kunye nezinye iikhemikhali. umbhobho njengosetyenziso olusikiweyo.

Ungayikhetha njani eyona Valve yeSolenoid ifanelekileyo?

Ukukhethwa kwevalve ye-solenoid kufuneka ilandele imigaqo emihlanu yokhuseleko, inzululwazi, ukuthembeka, ukusetyenziswa kunye noqoqosho, kunye neemeko zokusebenza kwintsimi ezifana: Ubungakanani beValve, uxinzelelo lokusebenza, uhlobo oluphakathi, ubushushu obuphakathi, ubushushu be-ambient, umbane wokubonelela ngombane, imowudi yoqhagamshelo, imo yokufakela, imathiriyeli yomzimba wevalvu, ukhetho olukhethekileyo, njl.

1. Khetha ubungakanani bezibuko (i-DN) kunye nohlobo loqhagamshelwano lwevalve ye-solenoid ngokweeparamitha zombhobho.
● Ukumisela ubungakanani bezibuko (DN) ngokwedayamitha yangaphakathi yombhobho okwisiza okanye imfuno yesantya sokuhamba.
● Uhlobo loqhagamshelo, ngokuqhelekileyo ukuba ubungakanani bezibuko bungaphezulu kwe-DN50, umthengi kufuneka akhethe uxhulumaniso lwe-flange, ukuba ≤ DN50 inokukhetha uxhulumaniso ngokweemfuno zabo.

2. Khetha imathiriyeli yomzimba kunye noluhlu lobushushu lwevalvu ye-solenoid ngokweeparamitha zolwelo.
● i-corrosive fluid: Ukukhethwa ngokufanelekileyo kwevalve ye-solenoid enganyangekiyo okanye insimbi epheleleyo;
● Ulwelo lwebakala lokutya: Ukukhethwa ngokufanelekileyo kwe-sanitary stainless steel material solenoid valve.
● Ubushushu obuphezulu be-Fluid: Ukukhethwa ngokufanelekileyo kwe-valve ye-solenoid enezixhobo zombane eziphezulu zokushisa kunye nezinto zokutywinwa, khetha uhlobo lwesakhiwo sePiston.
● Ubume be-Fluid: igesi, i-liquid okanye i-mixed state, ngakumbi xa ubukhulu be-port bukhulu kune-DN25 kufuneka icaciswe xa iyala.
● i-viscosity yamanzi: Ngokuqhelekileyo ukuba ngaphantsi kwe-50cst, ayiyi kuchaphazela ukhetho lwevalve, ukuba ngaphezu kweli xabiso, khetha i-valve ye-solenoid ephezulu ye-viscosity.

3. Khetha umgaqo kunye nesakhiwo se-valve ye-solenoid ngokwemilinganiselo yoxinzelelo.
● Uxinzelelo lwegama: Le parameter isekelwe kuxinzelelo lwegama lombhobho.
● Uxinzelelo lokusebenza: ukuba uxinzelelo lokusebenza luphantsi (ngokuqhelekileyo alukho ngaphezu kwe-10bar), isakhiwo sokuphakamisa ngokuthe ngqo sinokukhethwa;ukuba uxinzelelo lokusebenza luphezulu (ngokuqhelekileyo ngaphezu kwe-10bar), isakhiwo esisebenzayo somqhubi sinokukhethwa.

4. Khetha iVoltage
Kukhethwa ukukhetha i-AC220V okanye i-DC24V njengento efanelekileyo.

5. Khetha i-NC, NO, okanye ivalve ye-solenoid eqhubekayo yombane ngokwexesha eliqhubekayo lokusebenza.
● Khetha uhlobo lwe Ngokuqhelekileyo vula ukuba i-solenoid kufuneka ivulwe ixesha elide kwaye ixesha eliqhubekayo lokuvulwa lide kunexesha elivaliweyo.
● Ukuba ixesha lokuvula lifutshane kunye nefrikhwensi iphantsi, khetha eliqhele ukuvalwa ngalo.
● Kodwa kwezinye iimeko zokusebenza ezisetyenziselwa ukhuseleko, ezifana neziko, ukubeka iliso kwidangatye le-oven, akukwazi ukukhetha ngokuqhelekileyo ukuvuleka, kufuneka kukhethwe uhlobo lombane oluqhubekayo.

6.Khetha umsebenzi owongezelelekileyo ofana noKungagqabhuki kunye nobungqina baManzi ngokwemeko-bume yesiza.
● Imekobume eqhumayo: kufuneka ikhethe i-valve yeklasi ye-solenoid ehambelana nokuqhuma (inkampani yethu ekhoyo: Exd IIB T4) .
● Kwimithombo: kufuneka ukhethe ivalve yesolenoid engaphantsi kwamanzi (IP68).