I-valve ye-Solenoidluhlobo lwemishini yezimboni elawulwa yi-electromagnetism okuyizinto eziyisisekelo ezizenzakalelayo ezisetshenziselwa ukulawula uketshezi nokulungisa isiqondiso, izinga lokugeleza, isivinini kanye neminye imingcele ye-medium ohlelweni lokulawula izimboni.Kunezinhlobo eziningi zamavalvu e-solenoid, adlala izindima ezihlukene ezindaweni ezihlukene ohlelweni lokulawula.Okuvame ukusetshenziswa kakhulu i-one-way-Valve, i-Safety valve, i-Direction Control Valve, i-valve yokulawula isivinini, njll. I-valve ye-Solenoid inokusebenza okuhle kakhulu kokuvikela ukuvuza, ivuleke futhi ivaleke ngokushesha, amandla aphansi, afanele ukugqwala okuthile, ubuthi namanye amakhemikhali ngaphakathi. ipayipi njengendlela yokunqamula ukusetshenziswa.

Ungakhetha kanjani iValve ye-Solenoid Efanele Kakhulu?

Ukukhethwa kwe-valve ye-solenoid kufanele kulandele izimiso ezinhlanu zokuphepha, isayensi, ukwethembeka, ukusebenza kanye nomnotho, kanye nezimo zokusebenza zensimu ezifana: Usayizi we-valve, ingcindezi yokusebenza, uhlobo oluphakathi, izinga lokushisa eliphakathi, izinga lokushisa elizungezile, amandla kagesi kagesi, imodi yokuxhuma, imodi yokufaka, impahla yomzimba ye-valve, izinketho ezikhethekile, njll.

1. Khetha usayizi wembobo(DN) kanye nohlobo lokuxhuma lwevalvu ye-solenoid ngokuya ngamapharamitha wepayipi.
● Nquma usayizi wembobo(DN) ngokuya ngobubanzi bangaphakathi bepayipi elisendaweni noma imfuneko yesilinganiso sokugeleza.
● Uhlobo lokuxhuma, ngokuvamile uma usayizi wembobo ungaphezu kwe-DN50, ikhasimende kufanele likhethe uxhumano lwe-flange, uma ≤ i-DN50 ingakhetha uxhumano ngokuvumelana nezidingo zabo.

2. Khetha impahla yomzimba kanye nebanga lokushisa le-valve ye-solenoid ngokuya ngemingcele yoketshezi.
● Uketshezi olubolayo: Ukukhethwa okufanele kwe-solenoid engagqwali noma insimbi engagqwali egcwele;
● uketshezi lwebanga lokudla: Ukukhetha okufanele kwe-sanitary stainless steel material solenoid valve.
● I-Fluid ephezulu yokushisa: Ukukhetha okulungile kwe-valve ye-solenoid enezinto zikagesi ezisezingeni eliphezulu kanye nezinto zokuvala uphawu, khetha uhlobo lwesakhiwo sePiston.
● Isimo soketshezi: igesi, isimo esiwuketshezi noma esixubile, ikakhulukazi uma usayizi wembobo mkhulu kune-DN25 kufanele ucaciswe lapho u-oda.
● i-viscosity yoketshezi: Ngokuvamile uma ingaphansi kuka-50cst, ngeke ibe nomthelela ekukhethweni kwevalvu, uma ingaphezu kwalelivelu, khetha i-valve ye-solenoid ephezulu ye-viscosity.

3. Khetha isimiso nesakhiwo se-valve ye-solenoid ngokusho kwemingcele yokucindezela.
● Ukucindezela okuzisholo: Le parameter isekelwe kumfutho ovamile wepayipi.
● Ingcindezi yokusebenza: uma ingcindezi yokusebenza iphansi (imvamisa ingabi ngaphezu kwe-10bar), isakhiwo esiqondile sokuphakamisa singakhethwa;uma ingcindezi yokusebenza iphezulu (imvamisa ingaphezu kuka-10bar), kungakhethwa uhlaka olusetshenziswa umshayeli.

4. Khetha i-Voltage
Kukhethwa ukukhetha i-AC220V noma i-DC24V njengento elula kakhulu.

5. Khetha i-NC, CHA, noma i-solenoid valve efakwe ugesi ngokuqhubekayo ngokuvumelana nesikhathi esiqhubekayo sokusebenza.
● Khetha uhlobo oluvame ukuvuleka uma i-solenoid kufanele ivulwe isikhathi eside futhi isikhathi esivuliwe ngokuqhubekayo side kunesikhathi esivaliwe.
● Uma isikhathi sokuvula sisifushane futhi imvamisa incane, khetha evamise ukuvaleka.
● Kodwa kwezinye izimo zokusebenza ezisetshenziselwa ukuvikela ukuphepha, njengesithando somlilo, ukuqapha ilangabi lomlilo, akukwazi ukukhetha ukuvuleka ngokujwayelekile, kufanele kukhethwe ngokuqhubekayo uhlobo olufakwa ugesi.

6.Khetha umsebenzi owengeziwe njengokuvikela ukuqhuma kanye nokuvikela amanzi ngokuya ngendawo yendawo.
● Indawo Eqhumayo: kufanele ikhethe ivalve ye-solenoid yekilasi ehambisana nokuqhuma (inkampani yethu ekhona: Exd IIB T4) .
● Ngemithombo: kufanele ikhethe i-valve ye-solenoid engaphansi kwamanzi (IP68).