Bawul ɗin kula da wurin zama guda ɗaya na pneumatic yana amfani da matsewar iska azaman tushen wutar lantarki, ɗauki Silinda azaman mai kunnawa, kuma tare da taimakon injin bawul ɗin lantarki, bawul ɗin solenoid mai juyawa, bawul ɗin tsaro da sauran kayan haɗi don fitar da bawul, don cimma nasara akan. -kashe ko daidaitaccen tsari Karɓar siginar sarrafawa na tsarin sarrafa sarrafa kansa na masana'antu don daidaita kwarara, matsa lamba, zazzabi da sauran sigogin tsari.Bawul ɗin sarrafawa na pneumatic yana da sauƙin sarrafawa, saurin amsawa, da gaske mai aminci, babu ƙarin matakan tabbatar da fashewa.

Bawul ɗin kula da wurin zama ɗaya na pneumatic ƙananan, haske, babban aiki, babban ƙarfin aiki, yana dacewa da ƙa'idodin IEC na sabon ƙarni na samfuran bawul ɗin sarrafawa gabaɗaya.Ya dace da matsakaicin ruwa na gabaɗaya da yanayin tsari na tsarin tsarin samarwa.Samfurin mai amfani yana kunshe da mai kunna fina-finai na pneumatic da yawa da kuma ƙarancin juriya mai ƙarfi guda ɗaya.Sabuwar actuator yana da fa'idodi na babban digiri, nauyi mai sauƙi, shigarwa mai sauƙi da daidaitawa, ƙaƙƙarfan tsari, sassauƙan kwararar ruwa da babban madaidaicin kwarara.

Pneumatic guda kujera kula da bawul barga aiki, tare da abin dogara mataki halaye, kananan kujera yayyo, daidai kwarara halaye, m daidaitacce kewayon da sauransu.Fa'idodinsa na musamman a cikin kewayon masu amfani don cimma tasirin sarrafawa mai inganci.

6-Maki na yau da kullun na Gyaran Wuta na Pneumatic Single Kujera Control Valve:

1. Bincika bangon ciki na jiki: A cikin yanayin babban matsa lamba da matsakaici mai lalacewa, bangon ciki na bawul da diaphragm na bawul ɗin diaphragm sau da yawa suna tasiri da lalata ta hanyar matsakaici.

2. Duba wurin zama: Saboda aikin kutsewar kafofin watsa labaru, kafaffen wurin zama tare da rufin ciki na lalatawar dunƙule da sauƙi don yin kwanciyar hankali.

3. Duba Bawul core: Bawul core yana daya daga cikin sassa masu motsi na bawul ɗin sarrafawa, yashwar da matsakaici ya fi tsanani, dubawa da gyare-gyare don bincika a hankali ko sassan bawul din sun lalace.Ya kamata a maye gurbin spool da ta lalace sosai;duba shiryawa: Bincika marufi na asbestos igiya ya bushe, idan amfani da polytetrafluoroethylene shiryawa, ya kamata a kula da duba ko tsufa da kuma mating surface ya lalace.

4. Bincika ko fim ɗin roba a cikin actuator ya tsufa kuma ya fashe.

Abubuwan Kulawa 6 Don Kulawa Don Amfani da Wuta Mai Kula da Kujerar Kujera Guda Guda Na huhu:

1. Ya kamata a sanya shi a tsaye akan bututun da ke kwance, a cikin yanayi na musamman yana buƙatar shigarwa a kwance ko karkata, gabaɗaya ya kamata ƙara tallafi.Farantin madauwari da aka sanya a bangon akwatin da aka keɓe ya kamata ya kasance daidai da bangon akwatin da aka keɓe.

2. Ya kamata a shigar da shi kusa da ƙasa ko ƙasa, don gyarawa da gyarawa, don shigar da na'ura mai mahimmanci ko dabaran hannu, ya kamata a tabbatar da lura, daidaitawa da aiki da kuma dacewa.

3. Gabaɗaya an saita bututun wucewa, don gazawar tsarin sarrafawa ta atomatik ko kiyayewa don canzawa zuwa aikin hannu, ba don dakatar da samarwa ba.

4. Lokacin da aka shigar da injin tawul ɗin hannu, Hakanan ana iya sarrafa shi da hannu ta hanyar tsallake bututun wucewa, kuma ana iya amfani da shi don iyakance buɗewa.Lokacin da aka daina amfani da shi, dole ne a dawo da injin ƙafar hannu zuwa matsayin tsaka tsaki na asali don sauƙaƙe aikin yau da kullun na tsarin sarrafawa ta atomatik.

5. Pneumatic control valve shigarwa, ya kamata ya yi matsakaicin matsakaicin matsakaici da kuma jagorancin da aka nuna ta jikin bawul.

6. Kafin shigar da bututun ya kamata ya zama datti mai tsabta, slag.Bayan shigarwa, yi cikakken buɗewa, tsaftace bututun, da dai sauransu kuma gwada kullun kowane haɗin gwiwa.

Kasawa guda 6 na gama gari na Wutar Kula da Kujerun Kujeru Guda Guda Na Uzuri:

1.Bawul ɗin Sarrafa Ba Ya Aiki.Lalacewar aiki da dalilai sune kamar haka:

1).Babu sigina, babu wadatar iska.